玻璃鋼停車護欄桿
品牌:東莞雅日玻璃鋼
類別:非標定制
雅日玻璃鋼是東莞玻璃鋼外殼生產廠家,32年老品牌,提供玻璃鋼護欄桿、管道、蓋板等非標定制加工,500強企業認證,免費開磨具,免費樣品,直播驗廠....
玻璃鋼桿應用于停車桿的優勢
適用范圍:小區道閘、收費站道閘、停車場道閘、危險或限制路段道閘等。
質量輕:玻璃鋼桿的密度為1.9g/cm3,約為鋼質停車桿的三分之一(鋼抽油桿的密度為7.85 g/cm3),可以大大降低道閘閘機懸點載荷,因此可以運用功率小的電動機、較小的變速箱、較小的平衡塊、較輕便的結構形式,從而達到節約電能、提高綜合效率的目的。
彈性好:玻璃鋼桿的彈性模量為(4.0-6.0)×104MPa,僅為鋼質道閘桿的四分之一左右(鋼質道閘桿的彈性模量為2.1×105MPa),這樣可以延長閘機的使用壽命,還可以增加閘機的有效沖程,增加有效開合次數。
抗腐蝕能力強:玻璃鋼桿具有良好的抗腐蝕性、耐疲勞特性;主要由無堿、無捻玻璃纖維與熱固性樹脂預熱固化而成,是電的非導體,在鹽水及含有二氧化碳、硫化氫等環境下實驗,無腐蝕現象。這樣可以減少因腐蝕造成閘機桿斷裂而停止作業的情況,達到減少作業成本和增產創效的目的。
強度高:玻璃鋼桿的抗拉強度為810MPa,達到了D級鋼桿的抗拉強度,短期最大應力可達300MPa,最大載荷可達15t。
環保:傳統的停車桿多數采用鋁質桿,而鋁質桿在生產制造中需要做氧化等處理,會對環境造成惡劣影響。使用玻璃鋼桿替代鋁質桿,可充分降低制造過程中對環境的影響。
品質檢驗中 用途展示
The Advantages that FRP be Used in Parking Rod
Applications: residential road gate, toll gate, parking brake, dangerous or restricted road gate, etc.
Light weight: FRP rods density is 1.9g/cm3, about 1/3 of the parking rod steel (steel sucker rod density is 7.85 g/cm3), can greatly reduce the gate suspended load, so you can use small power motors, smaller gearbox, smaller balance blocks, lighter structure. In order to save energy, improve the comprehensive efficiency of the.
Good flexibility: the elastic modulus of FRP rods for (4.0-6.0) * 104MPa, only about 1/4 of the steel gate rod (elastic modulus of steel gate rod is 2.1 * 105MPa), it can prolong the service life of the gate, but also can increase the effective stroke of the gate, increase the effective opening and closing times.
Strong corrosion resistance: glass steel has corrosion resistance and good fatigue properties; It is mainly preheated and cured by thermosetting resin and glass fiber without alkali and twisting. It is a non conductor of electricity. It is tested no corrosion under the environment of brine and containing carbon dioxide and hydrogen sulfide. This can reduce the situation of stopping operation due to corrosion causing brake rod breakage, so as to reduce operation cost and increase production efficiency.
High strength: tensile strength of FRP rods for 810MPa, reached the tensile strength of D steel, the biggest short-term stress of 300MPa, the maximum load of up to 15t.
Environmental protection: most of the traditional parking rods are made of aluminum rods, while aluminum rods need to be oxidized in production, which will cause adverse effects on the environment. The use of fiberglass rods instead of aluminum rods can reduce the environmental impact in the manufacturing process.